cast travertine kitchen hood bannercast travertine kitchen hood banner

          Modifications available

 

Josephine Series Only

Our range hoods made from cast travertine can be modified, often with little additional cost. To the right are three variations to the Josephine Series. The two top pictures demonstrate how the Josephine Plain and Josephine Ornate can be altered to accommodate 9 foot ceilings. The picture bottom right has been modified for an 8 foot ceiling and can be done for both Josephine.

Changes to the Josephine series are limited to height only. Widths are fixed to 60” for the Josephine R-36 and 72” for the Josephine R-48. The R-36 and R-48 indicate the space between the corbels that allow for a 36” or 48” cook top respectively.
The main reason for this limitation is due to the corbel width (9") and the crown molding at the top of the mantel (3") adding a full 12" on each side of the stove/cooktop.

This design is timeless for large kitchen.

 

All other models can be modified to fit your particular specification need!

All our hoods are engineered to sit 36" above the stove.

 

Josephine Plain 36 modified for 9ft ceilings thmb

36”
48”

Josephine ornate  hood for 9ft ceiling thmg

36”
48”

Josephine Ornate 8 ft Ceiling thmb

36”
48”